Skip to content

Dust Collector

SKU DC-1000


In September of 2015, we released our new “Red” Twice As Sharp® with the dust collector ports. We tested all the available portable dust collectors and were not satisfied with the suction that was available on these commercial units. Because of this, we have designed our own portable dust collector and are manufacturing and assembling them here in the United States.

Stage 1 of the dust collector uses a total of 1400 CFM cyclonic action to catch most of the grinding dust in a pan. See the above pictures for a shot of this toroidal system and catch pan. Stage 2, the air goes through a disposable MERV 8 filter (minimum efficiency reporting value) and traps 70% - 80% of particles from 3 -10 microns.

The dust collector is moveable on industrial casters and the Twice As Sharp® can be used on the front or side of the dust collector. A plate prevents the blower on the opposite side from being blocked against a wall.

The system is easy to clean, easy to move, and helps keep the shop clean. Dust collection helps with worker safety by keeping the air cleaner and reducing respiratory issues. The unit includes the plenum, ducting, and adapters to fit the upgraded red Twice as Sharp® scissors sharpener.

This is a great system for high volume sharpening by professional sharpeners in industrial, food, and manufacturing facilities.

*Please note, this item is shipped on a pallet and a lift gate will be needed.

  • Cyclonic dust collection system
  • Merv 8 filter traps 70-85% of particles size 3-10 microns
  • Ducting and Plenum to fit the Wolff Industries Twice as Sharp® scissors sharpening system
  • Plenum allows for sharpening from the front or side of the cabinet
  • Keeps shop cleaner and reduces health risks

Did you notice?
  • The cabinet is portable thanks to the industrial strength casters.
  • The power switch controls the dust collection and Twice as Sharp®.
  • The entire system runs off normal 110v.
  • There is easy access for changing filters.

Recommended For

High volume scissors sharpening.
Industrial settings such as manufacturing facilities.
Food production facilities for cleanliness.
Professional sharpeners with dedicated maintenance shops.

What's in the Box?

Dust collection cabinet
2-way Plenum
2 hose clamps
Set of slotted finger guards with spark deflectors
2 rubber O-rings
Box of 12 filters
Operators Manual

Technical Specifications
  • Shipping – Shipped on pallet by common carrier.
  • Dimensions – 20”w x 34”d x 36" h
  • Voltage - 115 ac. 60 hertz. 3.7 amps.
  • Wattage – 407 watts.
  • Blower Motor – Dual thermally protected blowers.
  • Air Volume - 1400 CFM
  • Stage 1 Filtration - Cyclonic dust collector with catch pan.
  • Stage 2 Filtration - MERV 8 filter traps 70-85% of particles size 3-10 microns.
  • Filter Size – 8" x 18" x 1" actual size.
  • Port Size - Single 6" dust port.
  • Connection – Plenum and ducting for the Twice as Sharp® scissors sharpener.
  • Power - Dual protected 110 volt outlets controlled by power switch.


Manufactured and assembled with pride in the USA


Limited Warranty: Two year warranty from date of purchase against defective parts or workmanship with the exception of filters. Warranty limited to replacement of parts. This warranty covers only the original purchaser. Use of non-factory parts voids any warranty. This warranty gives you specific rights. You may also have other rights which may vary from state to state. Some states do not allow limitation or implied warranties or consequential damages, so these may not apply to you.

Disclaimer: There is no expressed warranty other than the limited warranty stated above. There is no implied warranty for the merchantability or for fitness for a particular purpose. Wolff Industries, Inc., will not be responsible for any consequential damages. Damages are limited to the replacement of the defective parts.